1.4404–X2CrNiMo17-12-2–AISI/SAE316L1.4404或316L奧氏體裝飾管AISI鑒于其鉻和鉬占比高，碳占比低，316型含有積極的耐腐化性。相對大直徑不低于，熱處理強度約為600MPa，僅是相對小載面，不錯在螺母化來的提升。不銹鋼有不同于合格率的存貨的來源，各類不同于的的產品制式或感覺，使您還可最好是地充分考慮您的推進消費需求。大家的的服務重點也可來樣加工或用刀切割成一塊塊。自然數簡稱：W、 號1.4404–1.4401（316）–US S31603–316L要求：ISO7153-1、ASTM F899、NF S94-090、NF EN 10088-3和-2、ASTM A479、ASTM A276、X2CrNiMo17-12-2–AFNOR Z3CND17-11-2–BS 316S31

MATERIAL SPECIFICATIONS:BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C(％): ≤0.030Si(％): ≤1.00Mn(％):≤2.00P(％)≤:0.045S(％)≤:0.030Cr(％): 16.5～18.5Ni(％): 10.0～13.0Mo(％):2.00～2.50Other(％): N≤0.11

MECHANICAL PROPERTIES( BAR/WIRE ROD ) AND INTERGRANULAR CORROSION RESISTANT TENDENCYVIASOLUTION TREATMENT

Thickness Diameter (d)/≤mm: 160Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): 40Elongation δ(transversal )≥(％): -Impact absorbing energy Akv≥/J|longitudinal: 100Impact absorbing energy Akv≥/J|transversal: -Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: YesThickness Diameter (d)/≤mm: 160<d≤250Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): -Elongation δ(transversal )≥(％): 30Impact absorbing energy Akv≥/J|longitudinal: -Impact absorbing energy Akv≥/J|transversal: 60Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: Yes核心種類大多數廣泛應用其中包括機械制造、有機化工、頁巖油、座鐘、農好產品加工食品類和醫院醫療儀器行業領域的好產品。這個板材能能使用大直徑或小斷面的超熱處理(熱處理)程序。